FPW RANGE FOR ECOLOGIC DISCHARGE

  • BASE FPW

    Transparent paste for background discharge printing,  can be added by 4% of Minerprint pigments for dark shades. This product is part of the “Ecologic discharge range”, therefor it can be considered suitable for formadehyde-free printing without the necessity of washing. For activation, add 6% of REDOXONE FPW.

  • DISCHARGE BASE ECO

    Used in discharge printing as background. For dark shades, must be pigmented with 4% of pigment Minerprint. Discharge Base ECO is formaldehyde-free, therefore it does not need a washing after printing. Activate with 3-6% Reducing Agent ECO.

  • DISCHARGE ECO

    Neutral paste for discharge printing, gives very bright, uniform and good color yield results. Must be activated with 3-6% Reducing Agent ECO. For a soft handle and color brilliance, Reducing Agent ECO must be dissolved very well and the polymerization must be carried out at a temperature of 170°-180° for about three minutes.

  • DISCHARGE FPW

    Neutral paste for discharge printing for very bright and uniform prints, with a good colour yield. The product must be activated with REDOXONE F PW. Printings do not release formaldehyde, this enabling to fulfill most exigent requirements. For the best results in colour brightness and handle, REDOXONE F PW must be dissolved very well and curing must be carried out at a temperature of 170-180°C for 3 minutes.

  • WHITE FPW

    White paste for ecologic discharge printing, with high covering effect and soft handle. Can be used as final white and as bottom white. This product is part of the “Ecologic discharge range”, therefor it can be considered suitable for formadehyde-free printing without the necessity of washing. For activation, add 6% of REDOXONE FPW.