PLAST RANGE

  • LUBRILAC PLAST

    Phthalate free thinner, used to reduce the viscosity of all lines PLAST.

  • NEUTRAL PLAST

    Plastisol transparent base, phthalate-free, to be used as reduction with Plast colour ranges. Mostly suggested as reduction for process colours Plast PK, as it does not change the viscosity of colours and allow to maintain the original design effect.

  • PLAST BASE EL

    Plastisol base for 3D printing with smoothed effect, phthalate-free. Typical use is for “lens effect”, thanks to its extremely high transparency.

  • PLAST BASE G

    Plastisol base for glitter printing or for final glossy effect, phthalate -free- Extremely transparent and suitable also for 3D printing wirh fine screens.

  • PLAST BASE HT

    Plastisol base for 3D printing with squared effect, phthalate-free.  Extremely transparent and suitable for fine screens.

  • PLAST BASE TR

    Plastisol transparent base, to be used as adhesive for transfer, phthalate-free. Print-outs with Plast Base TR will be extremely soft and elastic with high resistance to washing. Can be used or added to Plast and PMX colour range to give them the capacity of transfer foils.

  • PLAST COVERING

    Plastisol covering base to be used as reduction paste, phthalate-free.  Can be used for reducing viscosity of Plast  colour ranges without affecting the covering effect. 20% of Covering Plast in Plast colour range increses covering effect. Can be used also as a softener, giving to printed shades a “water-effect”.

  • PLAST DROP

    Plastisol base for improving elasticity and reducing curing time to 130° C, phthalate-free. Extremely transparent and with high binder content.

  • PLAST MATT

    Plastisol base for increasing matt effects, phthalate-free. To be used as reduction of Plast and PMX colour ranges.

  • PLAST WHITE AG

    Plastisol covering white with soft handle, phthalate-free, can be used as bottom white and as final white. High runnability, can be used with very fine screens (till 100/120 yarns/cm) that give to the product a similar-to-water-based white effect. Very quick in flash drying.

  • PLAST WHITE EL

    Plastisol elastic white, phthalate-free. Mostly indicated for elastic substrates, has a high runnability and dry very quickly under flash.

  • PLAST WHITE FLASH

    White plastisol, extremely rapid drying under lights flash; excellent covering and good hand and flexibility.

  • PLAST WHITE LF

    Plastisol low-fusion (130° C) white, phthalate-free, suitable for bottom white and for final white. Extremely covering and very quick in flash drying, mostly indicated for printing with multiple flashing between screens because of its highly reduced influence on overprinted pastes.

  • PLASTFOAM

    Plastisol  foaming base for 3D effects, phthalate-free. Must be added to Plast colour ranges, giving to puff effects a very closed and defined effect. It is suitable for being printed together with transfer products.