SILICONIC BASE

  • MINERSIL CAT B

    Catalyst for the Minersil siliconic pastes range, to be mixed in ratio 1:1 with the product needed. Catalysed products can be cured at low temperature (100° C) and have a pot-life of 24 hours.

  • MINERSIL FOAM

    Siliconic foaming base for 3D effects (puff) and for increasing opacity (matt effect) of any other product of the Minersil range, PVC-free. 3D effects are extremely elastic and closed. To be ready-to-print, Minersil FOAM must be catalysed with MINERSIL CAT B in ratio 1:1.

  • MINERSIL TR A

    Siliconic transparent base, specifically suggested for 3 dimensional, PVC-free gloss effects. Extremely transparent and elastic, and with a long pot-life (when catalysed)  sufficient to print for one whole working shift. To be ready-to-print, Minersil TRA must be catalysed with MINERSIL CAT B in ratio 1:1.

  • MINERSIL WHITE A

    Siliconic white base, PVC-free, suitable for bottom white and for final white. Extremely covering and elastic, it is suggested for printing on any elastic substrate. To be ready-to-print, Minersil White A must be catalysed with MINERSIL CAT B in ratio 1:1.